Re: [Chrysler300] Distributor rebuilders
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Distributor rebuilders





Hello All --

It may also have been my posting about the excellent job done by the Philbin Group last year.  At my request, they provided a detailed "before and after" presentation of my 1957 300C's distributor curve, both with and without vacuum advance.  They then separately corrected the mechanical and vacuum advance parts of the curve.  They also replaced the distributor shaft bushings to eliminate "wobble" and installed a separately provided Pertronix Ignitor system (from John Lazenby), and sent it back with a nice new paint job and shined-up tag on the distributor.    I can't think of how to improve upon that service!  As I recall, the cost at Philbin was ~ $160.00.  I have not run it yet, but I am totally confident that everything will be right; and if not, that they will bend over backwards to make it right!

Ray Melton

******************************************************************************************************************************************************************************************
On 7/30/2014 9:01 PM, Michael Moore Moore8425@xxxxxxx [Chrysler300] wrote:
 

I did-Philbin Mfg Group did a spectacular job on my 300H dissy.


I don't think they failed to replace ANYTHING, Big difference. 
Mike Moore

On Jul 30, 2014, at 7:57 PM, ldmiklas@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 


A few months back someone on the list had their distributor rebuilt and was highly pleased with the results. He posted the web page to the list and I "saved" it, but have since lost my hard drive and of course the webpage info.
 
Does anyone recall the post and could reply to me?  Thanks !!
 
Jeff Miklas - ldmiklas@xxxxxxxxxxx





__._,_.___

Posted by: Ray Melton <rfmelton@xxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.