Re: [Chrysler300] Carb linkage
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Carb linkage





Hi Tim,
If the D linkage is similar to the progressive linkage on an H, I have a "to scale" drawing of the 3 pieces in the linkage.
I made this drawing about 10 years ago for another club member who needed it for his E.
 The drawing shows top and side views, all dimensions and threading requirements.
A machinist could fabricate the linkage from the drawing.
Doug Warrener


From: "'tomlin' tomlin@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: "Chrysler 300 Club International" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Tuesday, October 21, 2014 5:14:29 PM
Subject: [Chrysler300] Carb linkage

 

Folks,
  I am trying to help Galen Wollbrink here.  He has his ‘58 D up and running with dual carbs and all that.  What he still needs to be running even better is the linkage that goes between the two carbs.  Does anyone have a spare linkage?  If not does anyone know of a source?  Don’t ask me too much in the way of details, as it is not a model with which I am very familiar!
Thanks,
Tim Tomlinson
W. Central IL




__._,_.___

Posted by: 2HsandaHeritage@xxxxxxxxxxx


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.