Re: [Chrysler300] Progressive Carb Linkage

["Michael Moore mmoore8425@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

There was a service bulletin issued which indicates the corrected way is for the slotted end to be on the front. I will see if i can dig it up.

Best,

Mike Moore  300H

On Nov 13, 2014, at 10:47 AM, 2HsandaHeritage@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

More pictures.
The 1962 service manual shows 2 ways to install the linkage.
The picture on page 14-44 shows the slotted end on the back carb, while the written instructions on page 14-36&37 call for the slotted end to be installed on the front carb.
I prefer to place the slotted end on the front carb.
Doug Warrener

[Non-text portions of this message have been removed]

__._,_.___

---

Posted by: Michael Moore <mmoore8425@xxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___