[Chrysler300] Straight and on centerline?

["Dave Dumais dave.dumais@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

My engine and 4 spd are now installed.  Good mounts lined up on the frame studs, and trans tailshaft was tweaked into place to line up mount with bolt and washer.

Looking into the engine comp't with hood not installed, the rear of the engine seems to be twisted a bit towards the pass side.

Should the center of water pump line up with center of radiator grill?  (radiator is not installed)

I am thinking of installing radiator and then 4 blade fan, and check clearance between fan tips and radiator.

If the spacing is even,then there should be no concerns>

Thanks,

Dave

__._,_.___

---

Posted by: Dave Dumais <dave.dumais@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___