Re: [Chrysler300]

I've experienced zero problems with electric pumps.

John Lazenby

On Monday, March 2, 2015 12:56 PM, "Ryan Hill ryan_hillc300@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Just a curious thought. Are any of you guys experiencing pump failures using electric auxiliary pumps to prime your systems? I know they're low volume pumps that are generally being used but wondered whether pushing fuel through a mechanical pump could do any damage to the valve/diaphram?

Ryan Hill

To: french_fryguy@xxxxxxxxx; jsnowosacki@xxxxxxxxx; fabe7445@xxxxxxxxxxxxx
CC: terrymct999@xxxxxxxxx; Chrysler300@xxxxxxxxxxxxxxx
From: Chrysler300-noreply@xxxxxxxxxxxxxxx
Date: Mon, 2 Mar 2015 15:37:13 -0500
Subject: Re: [Chrysler300]

Query, does Ethanol erode neoprene as well as lesser materials? I think the newer materials being used to rebuild fuel pumps may be more resistant. Comments will be appreciated.

Pete Fitch

In a message dated 3/2/2015 3:32:09 P.M. Eastern Standard Time, Chrysler300-noreply@xxxxxxxxxxxxxxx writes:

I've gone through numerous fuel pumps lately due to the crummy California gas. I believe I'm replacing them annually on each car now with one exception. Our '53 Imperial Newport still has the original pump and it always works. Now that I've stated that I'm sure it will start to leak. Beyond that I've had no issues.

John Lazenby

On Monday, March 2, 2015 12:18 PM, "John Nowosacki jsnowosacki@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Forgot to mention I also blame modern gas for hotter exhaust temps that cook manifold gaskets faster and dry out valve cover gaskets on the Hurst from close proximity to the HiPo exhaust manifolds.

Sent from my iPhone

On Mar 2, 2015, at 3:04 PM, JAMES FABER <fabe7445@xxxxxxxxxxxxx> wrote:

Check out gas stations around a lake - marine facilities. we live in a lake area and quite a few stations carry ethanol free gas for all the boaters, especially the bass boats with their hi gh HP outboards.

Jim in sunny, 71F South Carolina (supposed to rain tomorrow)

On Monday, March 2, 2015 2:57 PM, "John Nowosacki jsnowosacki@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

We've been on max (10%) ethanol in MA for quite a while now, and while it has ruined a couple of fuel lines in weed wackers and chain saws, it does not appear to have damaged any of my 300s. It has messed up the SU style carbs in my 72 MG Midget, as well as the sending unit in the gas tank and the electric fuel pump.

There isn't a single station in the state that sells real gasoline.

Sent from my iPhone

On Mar 2, 2015, at 2:49 PM, Terry Mctaggart terrymct999@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

I just read in Autoweek mag Jay Leno's essay on the evils of ethanol. In my 300F I have been running a mix of 100+ octane leaded aviation gas and pump premium spiked with the normal amount of ethanol. Has anybody in the Club experienced any problems with today's ethanol-infused gas? Jay talks about rubber parts (in fuel pumps, for example) being eaten up and ensuing engine fires. Terry McTaggart

__._,_.___

Posted by: John Lazenby <french_fryguy@xxxxxxxxx>

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

New Members 1

• Privacy • Unsubscribe • Terms of Use