Re: [Chrysler300] 413 pistons

["Marshall Larson granitledge@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

I have a set of pistons but may be stock.  They are remote from me at this time but can measure them when I return in May if that is of any help.  I had my block bored to eliminate the taper but never checked to see what size the removed pistons were.  Also don't remember what the new bore is.​

On Tue, Mar 10, 2015 at 10:35 PM, Mwl1967 mwl1967@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Hey everyone,

 

    I'm looking for a set of 413 pistons, preferably .030 or .040 over. I see a lot of truck 413 pistons available but not flat top and the compression is too low. I prefer cast over forged or hyperutectic.  Please pm me.

 

Thanks,

Mike Laiserin

--

Marshall Larson

__._,_.___

---

Posted by: Marshall Larson <granitledge@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___