[Chrysler300] G choke thermostats/ carb gaskets

["'Rick Vitek' rpvitek@xxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

As I work my way through the induction system my latest challenge is the choke thermostats. One is the correct part. The other is from another application with a different cup/pot that doesn’t fit right in the manifold  and where the previous mechanic cut off the cover’s “hump” above manifold level to get it to fit below the linkage. With two different thermostats the carb chokes don’t open at the same times/rates.

 

Are repros made of the thermostats? Thanks to the efforts of other club members I know the pots and gaskets are available. I’m not yet ready to go to manual chokes. I’m ok with going with a part from another application if someone knows of one. Of course I’ll have to replace both in that situation for balance. I know some other Carter thermostats fit in the correct pot. I took one off my Dodge truck and it fit properly in the pot but the linkage rod was too short. Are replacement linkage rods available, e.g. from carb rebuilders? A quick look on the net didn’t make this obvious.

 

One last question concerns the carb mounting gasket. There are the thin pliable ones and the thicker (approx 1/8 inch plus) stiff cardboard ones. Going between them may involve choke length adjustments. Which gasket, if either, is “correct” for mounting the carbs?

 

As always, thanks in advance.

.

Image removed by sender.
Image removed by sender.





[Non-text portions of this message have been removed]



------------------------------------
Posted by: "Rick Vitek" <rpvitek@xxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/