Re: [Chrysler300] The wheels on the 300's go round and round

Think I got the name wrong. I believe it was Jay Fisher and he also made repro outside mirrors.

John L.

On Thursday, May 28, 2015 1:57 PM, "John Lazenby french_fryguy@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Jim,

I think the Bronze repro caps were made by Louis Fischer some years ago. I've held one and they were extremely heavy and need to be cosmetically finished. Bob's caps are of the same type as Wheel Vintiques unless in recent times he has changed them

John Lazenby.

On Thursday, May 28, 2015 1:46 PM, "JAMES FABER fabe7445@xxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Jack and all,

I have 4 original wire wheels with one original center cap and two more center caps with the middle machined out.

Have 4 never used bronze repro center caps from Bob Bournstien. Had planned to put them on my B but you know the story about the clubs scoring with wires on a B.

Probably need to sell them as a set. They're in nice shape, dirty but only one small rust spot that I remember. Can email pics.

Now, here's the good part. In place of the area where the lugs bolt in being 12 ga steel, these wheels have 1/4" steel flanges welded in. These wheels will not tear up.

Need $1200.00 for everything plus shipping, guess $100 - 150 to ship.

Jim Faber in sunny South Carolina, with late afternoon thunder showers. fabe7445@xxxxxxxxxxxxx

__._,_.___

Posted by: John Lazenby <french_fryguy@xxxxxxxxx>

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

New Members 2

• Privacy • Unsubscribe • Terms of Use