Re: [Chrysler300] 1964 water pump
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1964 water pump





Since you have it apart,  visually compare.
In most cases the impeller is what is important. Usually an A/C car has bigger and maybe more  blades on the actual pump that goes into the housing.
A standard non-air pump will fit and not move as much water, making it run hotter.

Ray

On Mon, Jul 13, 2015 at 5:54 PM, Charles Kreszock kreszockcm@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 

300ers,

I have the car disassembled in the driveway.  I removed the radiator to have it flushed and will install a new fan clutch tomorrow so would like to resolve the water pump part number issue so I can start reassembling and road test before leaving for Macungie.  If you wish to chat about this call: 828 262 0393.

Mick
 




--
Ray Jones. Y'all come on down an see us. Ya hear?


__._,_.___

Posted by: Ray Jones <1970hurst@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.