Re: [Chrysler300] Oil filler/breather cap on a G

Oh, No, not steel wool! Maybe brass wool but;

ANY that I dissected used like a horse hair or a plastic equivalent. You just need something, dipped in oil, to trap any particles from air entering the engine when it cools down after a run. You know, like a modern plastic pot scouring pad!

I get to do the dishes occasionally. When doing these chores, it always helps if one can relate the armamentarium to useful car stuff!!

Greg

Sent from my iPad

On Aug 2, 2015, at 11:45 PM, 'Rick Vitek' rpvitek@xxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

First, thanks to everyone who helped with my heater hose situation.

When I first looked at the oil breather/filler cap on this G I thought “hmm, I wonder what happened to the steel wool stuffing that was in there”. Some time later I thought “hmm, maybe it didn’t come from the factory with the steel wool in it”. Can anyone tell me how he oil cap came that year, i.e. was it empty between the concentric cylinders of the cap? Thanks.

__._,_.___

Posted by: Greg Leggatt <ggleggatt@xxxxxxxxx>

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___