[Chrysler300] 300F trunk underside pad
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] 300F trunk underside pad





Hello Group,
What's the recommended material to cut and apply to the underside of a 300F trunk lid? Mine is painted and a few bits are missing. I want to go back to the original straw-colored look.
 
I recall we had this discussion a couple or so years ago, but I'm not finding it in our archives. I see the January 2011 email exchange re C300 trunks, and recommended use of 1/16" tar paper, along with discussion that Bob Merritt used to inventory 1/8" material, but that stock was fully depleted.
 
Noel Hastalis
F Coupe
Burr Ridge, IL
 
 


__._,_.___

Posted by: cpaviper@xxxxxxxxxxx


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap