Re: [Chrysler300] convertible top switch and lever needed
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] convertible top switch and lever needed

Ther is a universal heavier duty top switch , like 40a, maybe from Napa. Might be a truck application.  I know you want matching etc but chrysler switch kindof lousy . I had problems on67 dart and 67 cuda , intermittant action, burn, those switches not that different than 300 ( 3 terminal switch ) . You could probably start with one of those and get good machinist  to make look alike handle etc. i admit to using as it came , but 67  's not a 300F . Do not even notice unless looking for it on cuda. 
Might help you, might not. It will get it working . Nice hd switch . Off neutral off , single pole , spring return to center. 

Sent from my iPhone

On Nov 1, 2015, at 3:42 PM, charles dualghia@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

for my F project ....anyone have an xtra?


Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap