Re: [Chrysler300] Leaf spring pads
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Leaf spring pads

Thank You Carlton, I will call them.
 I do not need the pads between the leaves as they were replaced several years ago.  
There are pads which go between the springs and the axles which I need and do not see on their site, but they will surely know. 
Mike Moore
On Nov 15, 2015, at 6:08 AM, Carlton Schroeder <schroe99@xxxxxxxxxxxx> wrote:

Hi Mike,
It has been about 2 years ago for me but I was pleased with the rebuild pads for my H springs I bought from Springs n Things.  The pads are hard plastic and all the knobs that fit the holes in the spring leafs fit correctly and tightly.  I forgot the cost but I thought it was very reasonable.  I think I also talked to them on the phone and they were helpful.
I had my springs all apart and changed the bands and the bushings too.
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Michael Moore mmoore8425@xxxxxxx [Chrysler300]
Sent: Saturday, November 14, 2015 10:15 PM
To: Mike Moore
Cc: (chrysler300@xxxxxxxxxxxxxxx) (chrysler300@xxxxxxxxxxxxxxx)
Subject: [Chrysler300] Leaf spring pads

<image001.jpg> Can anyone recommend a source for new spring leaf pads for a 300H?


Mike Moore


Morgan Hill, Ca<image001.jpg>



Posted by: Michael Moore <mmoore8425@xxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap