Re: [Chrysler300] Leaf spring pads

["John Nowosacki jsnowosacki@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

I've ordered a set of new leaf springs for my G from Eaton spring, along with the 'installation kit' .  Does anyone know if these items are part of that kit?  I presume the pads between the leafs are pre-installed, but was unaware that there were pads between the springs and the axle itself.

On Sun, Nov 15, 2015 at 10:34 AM, RICK AND DEBBIE CLAPHAM rixpac@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

The perch pads are still listed in direct connection and less than $20.00
 

---

CC: chrysler300@xxxxxxxxxxxxxxx
To: schroe99@xxxxxxxxxxxx
From: Chrysler300-noreply@xxxxxxxxxxxxxxx
Date: Sun, 15 Nov 2015 07:08:24 -0800
Subject: Re: [Chrysler300] Leaf spring pads

 

Thank You Carlton, I will call them.

 I do not need the pads between the leaves as they were replaced several years ago.  

There are pads which go between the springs and the axles which I need and do not see on their site, but they will surely know. 

Mike Moore

300H

 

On Nov 15, 2015, at 6:08 AM, Carlton Schroeder <schroe99@xxxxxxxxxxxx> wrote:

Hi Mike,

It has been about 2 years ago for me but I was pleased with the rebuild pads for my H springs I bought from Springs n Things.  The pads are hard plastic and all the knobs that fit the holes in the spring leafs fit correctly and tightly.  I forgot the cost but I thought it was very reasonable.  I think I also talked to them on the phone and they were helpful.

I had my springs all apart and changed the bands and the bushings too.

Carlton

http://www.springsnthings.com/

 

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Michael Moore mmoore8425@xxxxxxx [Chrysler300]
Sent: Saturday, November 14, 2015 10:15 PM
To: Mike Moore
Cc: (chrysler300@xxxxxxxxxxxxxxx) (chrysler300@xxxxxxxxxxxxxxx)
Subject: [Chrysler300] Leaf spring pads

 

 

.

<image001.jpg> Can anyone recommend a source for new spring leaf pads for a 300H?

Thanks,

Mike Moore

300H

Morgan Hill, Ca<image001.jpg>

 

__._,_.___

---

Posted by: John Nowosacki <jsnowosacki@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___