[Chrysler300] 64 Package shelf
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] 64 Package shelf





Hello Jamie,

Any progress on the 64 package shelf and the rear window gasket?

I've had to remove  the 64 clutch pedal, due to the upper pin/stud being and  hanging up the clutch linkage.
There are two seals and two sets of small needle bearings in the pivot tube that bolts into the PB bracket.
Found those by calling Jamie Passon. 
 There is a large jointed spring that will need to be spread with flat washers upon installation.
Having the Winter off gives me time to squeeze into position and try to fix this Brute.

Merry Christmas
Dave





__._,_.___

Posted by: Dave Dumais <dave.dumais@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.