As some of you with good memory remember, I have a brake issue with my C. Some how the brakeshoes was the problem, not the MC. The shoes did not move as they should. They were loose, but not loose enough. So they did not return after the pedal was released.
Now, the right side is OK, but when trying to do the same on the left side, one of the brakeshoes gets in interference with the spring link (where the shoespring is attached to supportplate) Some how the springlink is resting at the brakeshoe. The spring pulls the springlink towards the brakeshoe, and moves the shoe against the drum. This happends inside the supportplate. Maybe the springlink has developed a wrong shape, because If I turns the adjustingcam the wrong way, the spring looses it’s tension, and fell of. This happens only on the rearfacing shoe, on the left front wheel. I can even manage to remove this springlink, from the supportplate. I can not determine if the link is misshaped or broken.
I will investigate this further.
300C in Norway
Posted by: =?utf-8?Q?Oddvin_Skr=C3=A5mest=C3=B8?= <oddvin@xxxxxxxxxxxxxxxxxxxx>
To send a message to this group, send an email to:
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang