Re: [Chrysler300] Rear Springs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Rear Springs





John,
"Not Correct" was part # only.
They are yours.
I can bolt them together thru the ends so they are one unit or lay them flat and bolt them to a 2x12 if I have one.
The name Estes rings a bell, but I can't place him.
You realize that I am in California - a long way from you.
Doug



From: "John Grady" <jkg@xxxxxxxxxxxxxxxxx>
To: 2HsandaHeritage@xxxxxxxxxxx, "Keith Simons" <ksimons@xxxxxxxxxxxxxxxxx>
Cc: "Chrysler300" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, February 15, 2016 8:09:59 AM
Subject: RE: [Chrysler300] Rear Springs

What was different to 62, Doug, ?? when you say definitely not correct? Length of them ? If they came off 300H, how are they not correct? Part # issue only? Did they change that with wheel base reduction? If not spoken for I’ll take them. Can you strap to skid can get Estes to pick up. Any $ you incur ,I can make you whole, OK?

 

Car sat low?

 

Sometimes same thing has different part #’s , minor upgrades, (or downgrades , like Mopar did to wreck AMC 4.0 six JEEP pistons! Managed to wreck one of best engines made)--- does not impact use of them

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 2HsandaHeritage@xxxxxxxxxxx [Chrysler300]
Sent: Saturday, February 13, 2016 11:53 AM
To: 2HsandaHeritage@xxxxxxxxxxx
Cc: Chrysler300
Subject: Re: [Chrysler300] Rear Springs

 



My mistake - should have said 59, not 69.

Definitely not correct for 62 - part #2275869 or 32240686.

Guess could be correct for 59, 60 & 61.

Anyone need them - free to good home - just pay shipping.

Doug Warrener

 

 


From: "2HsandaHeritage@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: "Chrysler300" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Friday, February 12, 2016 3:57:56 PM
Subject: [Chrysler300] Rear Springs

 

 

Hi Group,

Need help identifying a set of rear springs #1946113.

They came off of a 300H when I installed new Eaton springs.

They were rebuilt sometime in the past, but need to be re-arcked.

Does the 19 mean 1969?

Thanks,

Doug Warrener

 







__._,_.___

Posted by: 2HsandaHeritage@xxxxxxxxxxx


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap