Re: [Chrysler300] 300G Starter
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300G Starter





When I restored my H, I had the original starter rebuilt at a reputable shop in Florence, SC. The third time I fired it up, the starter quit. So, instead of spending more money on another rebuild (without a warranty), I went to Auto Zone and bought a "Lifetime Warranty" starter. Thirteen years and 17,000 miles later it's still performing as it did when I first installed it. Just sayin'.
 
Happy Moparing,
Mark
 
 
 
 
-----Original Message-----
From: 'Bob Jasinski' rpjasin@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: 'Travis Baker' <travisbaker4@xxxxxxxxx>; 'Chrysler300' <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Fri, Feb 19, 2016 1:12 pm
Subject: RE: [Chrysler300] 300G Starter



Travis,
 
The starter shouldn't be too difficult to find, as it was used over many years on many vehicles.  Having written that,  I would first consider having my original rebuilt, if you still have it.  There is one issue worth mentioning, that is there were at least two, if not three field windings available for the starter.  You want the heavy duty winding installed, as it provides the most torque for overcoming "heat soak", hard turnover, after the car is run and turned off then restarted..  I fought with the problem for several years until my rebuilder told me I had the light duty winding in it.  He sourced and installed the heavy winding and I haven't had an issue with hard turnover since.  Check for local rebuilders, they may also have the starter if you don't have one.
 
Bob J
 
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Travis Baker travisbaker4@xxxxxxxxx [Chrysler300]
Sent: Friday, February 19, 2016 7:11 AM
To: Chrysler300
Subject: [Chrysler300] 300G Starter
 
 
Hello Group,
 
Does anyone have a bead on a starter for a 300G?
 
Travis




__._,_.___

Posted by: Mark Souders <mrs954@xxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap