Re: [Chrysler300] NAPA Numbers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] NAPA Numbers

​The model I have is a correcting version.  I also have perhaps a dozen type balls of various fonts, a training manual, various literature, and repair parts.  At one time I worked for a competing computer company that used Selectric's as the operator interface.  I am talking BIG computers here.
If Karl will pass on what has broken on his Selectric I may have the part but certainly the knowledge to fix it.

On Tue, Mar 29, 2016 at 4:43 PM, 'John Grady' jkg@xxxxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

One can buy computer type faces too..obviously…


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of EMills_ATC millserat@xxxxxxxxxxxxx [Chrysler300]
Sent: Tuesday, March 29, 2016 2:23 PM
To: John Nowosacki; cpaviper@xxxxxxxxxxx
Cc: Chrysler300
Subject: Re: [Chrysler300] NAPA Numbers


Is there a particular font or typeset - as i recall the selectrics and later correcting seletrics used an interchangeable ball to allow selection of specific type face.

Edward Mills Antique Tractors 1930-1960 Antique Cars 1960-1985

On 3/29/2016 12:33 PM, John Nowosacki jsnowosacki@xxxxxxxxx [Chrysler300] wrote:


spring is almost here, which means flea markets, tag sales, garage sales, etc.

I bet someone could stumble upon an old IBM Selectric for super cheap money at one of these sales.  I'll keep an eye out.  Any particular model?


On Tue, Mar 29, 2016 at 12:58 PM, cpaviper@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


Re the NAPA parts lists in our Club site, a word of caution in that these aren't very current, and NAPA no longer carries some of the parts listed. Our 300C and D lists were most recently updated in 2005; 300F, G, H, J and L lists were most recently updated in 2010. A big thanks to Bob Merritt for his recent 1/29/2016 update of our Parts Vendor and Source list, also included in the Tech Department.

One item in Bob's list caught my eye - "Window Sticker" for 300F, G, H, available from Karl Pippart III. When I had occasion to speak with Karl a few months ago, he commented that his old IBM Selectric typewriter died, and he can no longer reproduce these window stickers. So, does anyone have an IBM Selectric hidden away in some closet or attic, that could be put to good use for our Club?


Noel Hastalis

Burr Ridge, IL

F Coupe


From: "'Ron Waters' ronbo97@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: "Chrysler300" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Tuesday, March 29, 2016 7:38:46 AM
Subject: Re: [Chrysler300] NAPA Numbers



OK. I see it now. Has anyone assembled a list for C300/300B parts available through NAPA ?



----- Original Message -----

Sent: Tuesday, March 29, 2016 7:31 AM

Subject: Re: [Chrysler300] NAPA Numbers



scroll 3/4 to the bottom.



------ Original Message ------

From: "'Ron Waters' ronbo97@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>

Sent: 3/29/2016 7:26:10 AM

Subject: [Chrysler300] NAPA Numbers




Somewhere on the club's website, there is a list of NAPA part numbers for things that fit our letter cars. Can someone post a link to that list, since I haven't been able to find it ?






Marshall Larson


Posted by: Marshall Larson <granitledge@xxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to

Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use


Home Back to the Home of the Forward Look Network Archive Sitemap