Re: [Chrysler300] Smooth as Silk drive shaft : )
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Smooth as Silk drive shaft : )





I need to address this / thankx, Bill Leahy in summer like Kennewick, Washington 

Sent from my iPad

On Apr 8, 2016, at 7:47 PM, "'Rob Kern' robkern@xxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Hello 300’ly to all!
    I just replaced the front ball and trunion u-joint assembly on my C with the upgrade of the slip assembly more modern front u-joint and I must say that I could not be more pleased.  The car runs as smooth as silk and is quieter.  It almost feels like the vehicle is at peace with itself!  I had tremors develop between 30 and 40 mph upon easy acceleration and again when accelerating above 60mph.  The front U-joint had 1/16th  inch play.   The grease retention boot was replaced a month ago when discovered that it left the party who knows how long ago.   The new u-joint was installed to the front of the driveshaft which was balanced with the rear u-joint in place and then installed.  Precision Drive Shaft in Oklahoma City did all the work and obtained all the parts .  3 day turn around time. $298.00.  Many thanks to Club members Mike Burke, George McKovich, Larry Jett, Murray Park and Jeff Carter for discussing the upgrade and helping me decide to go this route!  Rob Kern
 



__._,_.___

Posted by: William Leahy <bleahy@xxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap