[Chrysler300] Whoa, Nelly!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Whoa, Nelly!

It seems to me that the parking brake may be a little less effective in preventing my cars from rolling backwards.  Perhaps the rear brakes are more self-energizing when rolling forward.  On my vehicles, I really stomp or yank the parking brake pedal or lever when parking on an uphill grade—and I do this before placing the selector in “Park”.  This way, I can get in, stomp the brake pedal, release the parking brake and hope to easily move the selector from “Park” to “Drive” or “Reverse”.  Our little ’86 Chrysler T&C convertible (K-car) is particularly difficult to get out of Park if the proper parking brake process has not been implemented.  I know that some cars have had to get a little tug or push to take the pressure off of the parking pawl.  And with stick shifts, fuggittaboutit unless you have a competition clutch—and don’t count on that.   


Way too many people have been run over by their own vehicles while the vehicle was in “Park” or at least cringed as they saw their car going out on its own to play in traffic or the neighbor’s pool.  Don’t let it happen to you.  Thanks to the members who have shared their horribles.  I’ll add that a farmer friend was run over by his own Ford 3/4T truck as it slipped out of “Park” on its own with the motor running and started backing up.  He attempted to get back in and slipped under the LF tire which cracked his pelvis.  We can and should learn from these shared horribles.


Much too late for a recall on our letter cars, but the problem is applicable to ALL vehicles—new and old.


Rich Barber

Brentwood, CA (Kind of a belt and suspenders sort of guy)


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Ryan Hill ryan_hillc300@xxxxxxxxxxx [Chrysler300]
Sent: Friday, April 29, 2016 3:08 PM
To: Don Warnaar <300country@xxxxxxx>; Noel Hastalis <cpaviper@xxxxxxxxxxx>; scooter465@xxxxxxx
Cc: swotring <swotring@xxxxxxx>; David Schwandt <finsruskw@xxxxxxxxxxxxxxx>; Dave Dumais <dave.dumais@xxxxxxxxx>; yahoogroups <chrysler300@xxxxxxxxxxxxxxx>; Ma Mo <60chev@xxxxxxxxxxxxxx>; Bobby Dunn <bdunn@xxxxxxxxxxxxxxxxxxxx>; Donald Cole <mr300k@xxxxxxxxx>
Subject: RE: [Chrysler300] Setting the parking brake . 64 300



Agree completely. It baffles me when I see people who should know better, not setting the parking brake before releasing the brake pedal on automatics, particularly on any sort on uneven surface. If you choose to call it an "emergency brake" and make that argument, it might not be much help in an emergency if you never use it and keep it freed up.

Ryan Hill

To: cpaviper@xxxxxxxxxxx; Scooter465@xxxxxxx
CC: swotring@xxxxxxx; finsruskw@xxxxxxxxxxxxxxx; dave.dumais@xxxxxxxxx; chrysler300@xxxxxxxxxxxxxxx; 60chev@xxxxxxxxxxxxxx; bdunn@xxxxxxxxxxxxxxxxxxxx; mr300k@xxxxxxxxx
From: Chrysler300-noreply@xxxxxxxxxxxxxxx
Date: Fri, 29 Apr 2016 15:45:39 -0400
Subject: Re: [Chrysler300] Setting the parking brake . 64 300


On any car, vintage or modern, I always set the parking brake unless on completely level surfaces, such as in my garage.


It really bothers me when I see people shove the car in park and then let it roll a bit until the pawl engages.  Puts too much stress on the pawl.


By using the parking brake regularly, it never corrodes in place to the point where it can't be used.  Of course, with the early 300s with no park position, it must be used.  And even then, as Dave Schwandt said, having a wheel chock handy is a good idea.


Don Warnaar




Posted by: "Rich Barber" <c300@xxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang


Home Back to the Home of the Forward Look Network Archive Sitemap