RE: [Chrysler300] Survey - 300F Grille Hardware
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] Survey - 300F Grille Hardware

It would seem from forces involved they have to be there , or chance of cracking grill on shock load ( bump) . Easy to make if you had to a machine shop , aluminum.


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Lindsey lindsey@xxxxxxxxxxxxxxx [Chrysler300]
Sent: Saturday, April 30, 2016 11:27 AM
To: nick@xxxxxxxx
Cc: Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] Survey - 300F Grille Hardware


Mine has those spacers.

Sent from my iPad

On Apr 30, 2016, at 10:07 AM, nick@xxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


Trying to find out if every 300F came with angled spacers under the screws that hold the horizontal bars to the grille shell. You can see a picture of the ones on my car at the link below.

The grille from my old car does not have these but I don't know if the grille shell had been replaced or if the spacers might have fallen out. Another car is also missing them but it has a broken grille shell. The parts book does not show these spacers.

Thanks, Nick.



Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap