RE: [Chrysler300] 1955 Powerflite Leaking
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 1955 Powerflite Leaking

NAPA # for that seal is/was 49482

At least it is in my 1985 cross reference book

Good Luck!


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of 'Ron Waters' ronbo97@xxxxxxxxxxx [Chrysler300]
Sent: Friday, May 13, 2016 11:57 AM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 1955 Powerflite Leaking


Hi All -


I have a nasty leak in a 1955 Powerflite. It seems to be coming from the
lever area. My theory is that it's the manual valve lever shaft oil seal,
which is part no. 1408353. . 


Does anyone have a NAPA (or other) part number for that seal ?


Also, the book mentions that a tool, C-3277, is used to install the seal.
Does anyone know where I can get this tool, or does anyone know a workaround
in case this tool is not available ?



[Non-text portions of this message have been removed]

Posted by: "David Schwandt" <finsruskw@xxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to

Yahoo Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo Groups is subject to:

Home Back to the Home of the Forward Look Network Archive Sitemap