RE: [Chrysler300] 300G Parts Wanted
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 300G Parts Wanted





There is a dodge van that uses the same cross section molding, runs down the side of the van...I had that problem on a G long ago..they are all wrecked on most G . I wish I could remember more ..maybe 70’s 80’s van ; you can cut to length. Maybe it helps.

John

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of cv300g@xxxxxxxxx [Chrysler300]
Sent: Tuesday, May 24, 2016 9:23 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 300G Parts Wanted

 




I am searching for the following for my 300G.

 

The long straight Stainless Steel trunk moulding. Its the upper moulding that runs from tail light to tail light. I would like to find one that is Dent FREE and Not Bent..

 

I also need the grille Horizontal Bars that are in excellent condition or ones that are not broken and pit-free that I can have re-chromed.

 

Please contact me with what you have.

 

Thanks and have a great day  !!!

 

Charlie Valentine






__._,_.___

Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.