RE: [Chrysler300] 300G Parts Wanted
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 300G Parts Wanted

Similarly, I’m told that a replacement for the C-300/300B (only) SS strip that goes across the front of the car just above the front bumper and under those great grille halves can be fabricated from the straight piece that goes across the back of the car just above the back bumper.  Make a pie cut in the center to facilitate making the shallow bend for the front piece.  The rear SS trim pieces appear to be present on all 1955 Chryslers and ’56 Chrysler wagons.



Rich Barber

Brentwood, CA


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of John Nowosacki jsnowosacki@xxxxxxxxx [Chrysler300]
Sent: Wednesday, May 25, 2016 12:46 PM
To: John Grady <jkg@xxxxxxxxxxxxxxxxx>
Cc: Charlie V <cv300g@xxxxxxxxx>; list server <Chrysler300@xxxxxxxxxxxxxxx>
Subject: Re: [Chrysler300] 300G Parts Wanted



It would be great to identify the actual van make/model/year to see if we can find any NOS/used in better shape than the dinged up units on our G cars.  Is this a possible choice for a future club reproduction item?  Seems like all G owners have this same problem to one extent or another.  I'd certainly buy one for my car.


On Wed, May 25, 2016 at 11:54 AM, 'John Grady' jkg@xxxxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


There is a dodge van that uses the same cross section molding, runs down the side of the van...I had that problem on a G long ago..they are all wrecked on most G . I wish I could remember more ..maybe 70’s 80’s van ; you can cut to length. Maybe it helps.



From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of cv300g@xxxxxxxxx [Chrysler300]
Sent: Tuesday, May 24, 2016 9:23 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 300G Parts Wanted


I am searching for the following for my 300G.


The long straight Stainless Steel trunk moulding. Its the upper moulding that runs from tail light to tail light. I would like to find one that is Dent FREE and Not Bent..


I also need the grille Horizontal Bars that are in excellent condition or ones that are not broken and pit-free that I can have re-chromed.


Please contact me with what you have.


Thanks and have a great day  !!!


Charlie Valentine



"A government big enough to give you everything you want, is big enough to take away everything you have." ... Thomas Jefferson 


Posted by: "Rich Barber" <c300@xxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap