My first ’63 Chrysler conv 300 had rear brakes that had the hub attached with key slot. After quite a bit of effort, I was able to remove the brake drums with hubs.
These rear drums (11x3) are becoming hard to find that have any metal left.
My current ’63 300 conv has rear drums that slide off and the hubs remain on the vehicle. I believe some modification by grinding was done before I got it to loosen the drums from the hubs.
Question: Does anyone know if there is a generic Mopar or other model (11x3) drum that would fit over the existing hub?
This set up certainly makes it easier to access the brakes.
Posted by: "Mark Lindahl" <MPLindahl@xxxxxxxxxxxxx>
To send a message to this group, send an email to:
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang