Re: [Chrysler300] Thompson Power Steering
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Thompson Power Steering





Hi George,

It's been a few years, but I'm pretty sure I was able to pick up every Oring I needed for my Thompson rebuild at a local hydraulic/pneumatic supply house. And very inexpensively too.

Keith
-

On Thu, Jun 2, 2016 at 2:34 PM, George McKovich george@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 

Does anyone have a NAPA part number for the large O ring/seal for the 57 Chrysler Thompson Power Steering pump??

Thanks
George




__._,_.___

Posted by: Keith Boonstra <kboonstra.zeegroup@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap