Re: [Chrysler300] Thompson Power Steering
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Thompson Power Steering





Charlie,

I believe the Thompson is a one-year (1957) pump.

Keith
-

On Thu, Jun 2, 2016 at 3:14 PM, Charlie V <cv300g@xxxxxxxxx> wrote:

Is the 57 pump same as the  62 pump ? I got mine for my 62 locally, about 3 miles away
 If same I can get one today or tomorrow  and send it to you. It was very reasonable. 

Charlie
Sent from Yahoo Mail on Android

On Thu, Jun 2, 2016 at 3:00 PM, Keith Boonstra kboonstra@xxxxxxxxxxxx [Chrysler300]
 

Hi George,

It's been a few years, but I'm pretty sure I was able to pick up every Oring I needed for my Thompson rebuild at a local hydraulic/pneumatic supply house. And very inexpensively too.

Keith
-

On Thu, Jun 2, 2016 at 2:34 PM, George McKovich george@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 

Does anyone have a NAPA part number for the large O ring/seal for the 57 Chrysler Thompson Power Steering pump??

Thanks
George





__._,_.___

Posted by: Keith Boonstra <kboonstra.zeegroup@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.