I did same thing .. Cleaned and lubed door latches with "lubriplate" advised by third party that it was great stuff . Looked like great stuff . Years later latches all erratic --stuff was a white semisolid mess . Don't listen as much to third parties now that I am older. Had also noticed it was hard on my cars from factory.. Now I keep a small cartridge of name brand lithium front end grease made for a caulking gun type greaser with the end open , tooth pick ( big one ) in it . Use for everything . Lately into using 75w Mobil one rear axle fluid as my "oil" . Stays put 100% synthetic means it is not going down hill . As in running away or deteriorating . Great stuff .I put In small plastic squeeze bottle . Stinks --but great stuff .
It is amazing how a drop of oil here and there would have prevented 100's of small problems .. Pw , p seats, heater fans , latches , hinges ,speedo bushing at dash , tach , e brake cables etc etc . Careful to lube now . They had no time on the line
Sent from my iPhone
I have to agree, I used white lithium on door latches of a couple vehicles 10 or so years ago and found they became sticky and eventually wouldn't latch. I recall using marine grease (white) I had for outboard motors with success but don't want to recommend
it further than to report no further problems.
Ryan Hill
That stuff gets hard as a rock , check your ( inoperable due to it ) door latches . Suspension grease is best I think now ., tough stuff stays grease .
Sent from my iPhone
I use white lithium grease in a spray can. Available at most auto parts stores here in the states.
Chris the K MANIAC
-----Original Message-----
From: 'Tomas Turovara' 14149@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: Chrysler300 <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Sat, Jul 2, 2016 8:16 am
Subject: [Chrysler300]
Hi 300 people
What kind of grease should be used in the window regulator gearbox with plastic gear?
Tomas Turovaara
Kengisgatan 33
981 33 Kiruna
Sweden
Ph +46 980 14149 cell +46 70 5544890 Fax 46 980 66404
__._,_.___
Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
![]()
__,_._,___
|
Back to the Home of the Forward Look Network
Archive Sitemap