Re: [Chrysler300] 1957,58,59 300 side ornamentation letter and number re
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1957,58,59 300 side ornamentation letter and number retention

The original owner of my 300E Convertible epoxied the letters on both the side medallions because she said the clips would come slightly loose and the letters would rattle which bugged her to no end. Glue away!
Jim Bartuska
Founding member
In a message dated 2016/07/08 05:10:23 P.M. Eastern Daylight Time, Chrysler300-noreply@xxxxxxxxxxxxxxx writes:

To any C, D or E members who have had to secure the numbers and letters to the side quarter plastic disc.  I have searched but have not been able to locate the small tinnerman like clips that hold the cast numbers and letter to the plastic red white and blue disc.  I can epoxy them but without some mechanical hold onto the pins I fear they will only break lose.  I have ordered numerous clips and push-ons but with so small a height to the pin I can't get any to hold.  Anyone else have a similar experience.  And thanks to all who responded to my last question.  Marv Raguse....57 and 58 300s...


Posted by: BARJAM300@xxxxxxx

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap