Re: [Chrysler300] Magnum Force C-Body Disc Conversion For 57-64
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Magnum Force C-Body Disc Conversion For 57-64

I also did the AAJ front conversion kit. It was a very simple conversion, and I am very pleased with the results in every way on our C. It came with a proportioning valve which we mounted just ahead of the LR wheel/axle so we could get at it easily for initial adjustment. But to finally tune the front-to-rear balance just right I still had to install a check valve at the rear.

Keith Boonstra

On Sat, Jul 23, 2016 at 12:59 PM, John Nowosacki jsnowosacki@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

I did an AAJ conversion on my 57 and it allowed me to keep the original wheels.

On Sat, Jul 23, 2016 at 11:18 AM, Tony Rinaldi awrdoc@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Hi To All,

Has anyone done this conversion? It does require 15" wheels. 

"A government big enough to give you everything you want, is big enough to take away everything you have." ... Thomas Jefferson
Conservatives believe government action is an obstacle to our freedom. Leftists believe our freedom is an obstacle to government action. 


Posted by: Keith Boonstra <kboonstra.zeegroup@xxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to

Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use


Home Back to the Home of the Forward Look Network Archive Sitemap