[Chrysler300] Chrysler with a 354 hemi and a 300B dash and wheel
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Chrysler with a 354 hemi and a 300B dash and wheel





Mick:

 

Beautiful car with a 300B steering wheel, dash and dash pad.  That should qualify it for a viewing.  And, very nice photography that shows off the Highlander interior.  I half expected to see a ’56 DeltaWing under the hood.

 

However, the taillights do look like they were designed by a committee.

 

C300K’ly,

Rich Barber

Brentwood, CA (104+ today)

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Mick Kreszock kreszockcm@xxxxxxxxxxxx [Chrysler300]
Sent: Tuesday, July 26, 2016 6:16 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] 300 J

 

 

Thought I'd share this with everyone in 300 land.  (Although it is not a letter car.)

 

 

On Mon, Jul 25, 2016 at 1:41 PM, Keith Boonstra kboonstra@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Jeff's always been a great resource of both parts and info to me. Glad he had what you need.

 

Keith

-

 

On Mon, Jul 25, 2016 at 1:33 PM, Albert Vannice <MAVCHE@xxxxxxxxxxxx> wrote:

​Keith,

     I was checking the web before I called Jeff, but he had all I needed so I have ordered everything from him.

Al


From: Keith Boonstra <kboonstra.zeegroup@xxxxxxxxx>
Sent: Monday, July 25, 2016 9:47 AM
To: Albert Vannice
Cc: Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] 300 J

 

I'm going to guess that Jeff Carter will have both of these items on hand for you.

 

Keith Boonstra

-

 

On Mon, Jul 25, 2016 at 9:24 AM, Albert Vannice mavche@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Hello Club members,

     I am in need of a couple of items for my 300 J.  Would anyone have a fuel filter for the fuel gauge tank unit (part # 1670694)?  Also, the vacuum advance isn't working, so I also need a vacuum chamber for the distributor (part # 2084868).  It appears from the parts manual that this vacuum unit will fit any 413 engine.  I am starting to search the web so any thoughts about whom to contact will be appreciated.  Thanks in advance,

Al

 

 

 

 



__._,_.___

Posted by: "Rich Barber" <c300@xxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap