RE: [Chrysler300] 300 G Grille Emblem

["'John Grady' jkg@xxxxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

I’d go 3M “clear” (yellow) “weatherstrip cement”--- it is flexible. Like rubber cement. Follow directions..trial fit, then put some , probably in a thin ring on both surfaces  let get tacky, press on. Stuff that dries or sets rock hard may crack , causing loss of emblem as plastic and metal expand differently with temp. There is probably a blob of hard stuff left behind now. I am sure there 100 opinions. Super glue is fussy stuff. I’d say that is not good. You never know if it “took off” ; also solvents in glues can attack back of emblem if lots slobbered on , = go cool and easy.

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Val Jeffers edward1108@xxxxxxxxx [Chrysler300]
Sent: Wednesday, August 10, 2016 2:38 PM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 300 G Grille Emblem

 

 Hi All,

             What is the best way to attach the above emblem ? I have a new tube of "super glue" but wanted help first.

 

 

                                                                 Thanks,

 

                                                                 Val Jeffers

__._,_.___

---

Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 2

• Privacy • Unsubscribe • Terms of Use

__,_._,___