Re: [Chrysler300] G Dash Pads
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] G Dash Pads

There is only one supplier of dashpads for a 300G that really look like the originals with all the crispness of lines as on the original ones.  RD Autoline out of Sweden.  Their current price at current exchange rates is about $580 and shipping to the U.S. is about $170.  They really look like the originals whereas all the dashpads recovered by Just Dashes loose so much of the character lines that they look terrible to me, and I would never consider one.  And Just Dashes charges in excess of $1200 to do their dashes.  The choice is clear.  I would rather keep an old cracked dash pad than cover my instrument panel with one from Just Dashes since they look so "puffy".  Just Dashes does OK when you have just curved surfaces like the 300F, but RD Autoline also duplicates those with a new molded pad that looks just like the original ones as well.  And they are at least half the price.  Their website is currently being upgraded but here is the link to it (and you can see a reproduction 300H dashpad, which is the same pad as for the 300G - but in tan rather than black as in the 300G - they can do any color):
In Sweden, a lot of Forward Look car parts are being duplicated due to the enormous interest in these cars over there.  And we are beneficiaries now.
You can contact them by email and they will get back with you.  They are currently on vacation at this time, but should be back shortly.  I currently have two dashpads on order from them for my 1961 Chrysler New Yorker (which they will duplicate in red, my original dash color) and my 1958 Dodge Regal Lancer.  I will also be ordering a couple more soon as well.  I have no idea what I would do without their dashpads.  None others are even close.

Steve Albu

On Thu, Aug 11, 2016 at 11:13 AM, danakolaia@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Hi All - I am looking for a source for new dash pad for my 300G. I would lie to have it done in tan. Any suggestions would be appreciated.



Posted by: Steve Albu <saforwardlook@xxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to

Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use


Home Back to the Home of the Forward Look Network Archive Sitemap