Re: [Chrysler300] 1961 300 G A/C Fuse
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1961 300 G A/C Fuse


Sent from Yahoo Mail for iPhone

On Saturday, August 13, 2016, 4:08 PM, George McKovich george@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


Are you guys referring to Factory AC?


On Aug 13, 2016, at 1:18 PM, Keith Boonstra kboonstra@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:



Another thing to test is exactly when the fuse blows. If you turn your stat of OFF and it still blows, your problem is somewhere in  the dash controls or power supply dead-shorting. But if it only happens when you demand the compressor, you can suspect the stat arcing or else a short in the single wire leading from the dash to the compressor.


On Sat, Aug 13, 2016 at 1:27 PM, Val Jeffers edward1108@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

  Hi All,

             Just had a new receiver/drier installed yesterday. The mechanic advised the air was nice and cold. Now the 25 amp fuse keeps blowing every time I snap in a new one ! Any thoughts as to the reason ?


                                                                                               Val Jeffers




Posted by: Val Jeffers <edward1108@xxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to

Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use


Home Back to the Home of the Forward Look Network Archive Sitemap