Re: [Chrysler300] Pinion seal for a C
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Pinion seal for a C

NAPA is saying it's a #18880. That's also a FedMogul number. They are going to order one in, and we shall see.

Thanks all.


On Mon, Aug 22, 2016 at 10:40 AM, John Grady <jkg@xxxxxxxxxxxxxxxxx> wrote:

I think all 300C’s are 8 ¾ axles, but there are different pinion stub diameters, but not during/ in 57? From memory,.  Seal for 8 ¾ should be right.


From: Chrysler300@xxxxxxxxxxxxxxx [] On Behalf Of kboonstra@xxxxxxxxxxxx [Chrysler300]
Sent: Monday, August 22, 2016 9:57 AM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Pinion seal for a C


Good morning, 


To avoid the need to call out the HazMat team to follow me on my upcoming trip to the Elkhart Lake meet, I'm going to have to either put a diaper under my (C's) rear end, or plug a leak.


Carquest shows 2 different pinion seals for 1957 Chrysler - for 8-3/4 and 8-1/4 rings. Can someone please give me the original Chrysler part number, or perhaps the ring size? Carquest says the 8-1/4 takes a National 5126. I want to make sure they have the right one on hand when we schedule the repair so your help is appreciated.




Keith Boonstra



Posted by: Keith Boonstra <kboonstra.zeegroup@xxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to

Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use


Home Back to the Home of the Forward Look Network Archive Sitemap