Re: [Chrysler300] 300 G Rear Main Seal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300 G Rear Main Seal





If you're really good (and I'm not) you can potentially deal with this with the engine in the car.  You have to move steering parts out of the way, loosen motor mounts enough to get oil pan out of the way, and then do the job from under the car by loosening/removing bearing cap(s).  I drove all the way to Skowhegan ME to have it done by Dominick Rinaldi many years ago on my G coupe.  That's when I found out from him that "someone had been in there before", because my G had a windage tray in the oil pan!  It cost significantly less having this done in the car by him than it would have to pay for engine removal/disassembly/re-install.
Local engine folks all wanted the engine out, and then of course they said they might as well do a bunch of other stuff since it was out and on the stand, but it was like $300 instead of $3000 by just having Dom do the seal.  I believe that car ended in 17087 as VIN number.  Would be interested in knowing where that car wound up.  I sold it to a person in CT, who I believe then sold it to someone in PA?

On Tue, Aug 23, 2016 at 6:56 PM, Val Jeffers edward1108@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 

  Hi All,
              Mine has been slowly leaking for a very long time. I understand replacing the seal (which is a type of rope) requires removing a cross member and transmission. Am I correct ?

                                                                            Thanks,

                                                                            Val Jeffers




--
"A government big enough to give you everything you want, is big enough to take away everything you have." ... Thomas Jefferson
Conservatives believe government action is an obstacle to our freedom. Leftists believe our freedom is an obstacle to government action. 


__._,_.___

Posted by: John Nowosacki <jsnowosacki@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap