[Chrysler300] Possible source for PW switch plastic connectors
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Possible source for PW switch plastic connectors





Fellow on the FL forum is looking into this as a project.

These are the plastic parts of the switches, both 4 and single gang units, into which the wire terminals snap for connection to the back side of the switches.

You know, if you have ever been into these, they are often melted and distorted to the point the connectors will not stay in place.

(good place to insert a picture!!!....IF only we could do that!!!}

Check out the thread on the forward look Forum

I think we should support this project.

If he gets enough orders, he says he can bring the price down some.

 

Dave Schwandt

See you all in a couple weeks, OK??



__._,_.___

Posted by: "David Schwandt" <finsruskw@xxxxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap