RE: [Chrysler300] More stuff needed
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] More stuff needed





Pete:

 

Be sure to note that the hardtop and convertible visors and hardware are different.  A vendor tried to convince me otherwise, but they have different dimensions.  The hollow plastic tips get brittle and broken after 50 years + and I searched widely for an appropriate replacement from other stuff, like tubing.  Anyone found a suitable replacement for the little plastic tubes?

 

Rich Barber

Brentwood, CA

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of pffkllc@xxxxxxx [Chrysler300]
Sent: Thursday, October 06, 2016 10:08 AM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] More stuff needed

 

 

Hi Group:

 

    I am looking for the channel that holds the boot for Anne's K convert.  This piece attaches to the back of the rear seat.  I also need the visor hardware along with the plastic tips, for the K convert.  We scavenged the ones from our other convert and now have to replace them.

 

Thanks,

 

Pete Fitch



__._,_.___

Posted by: "Rich Barber" <c300@xxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.