Re: [Chrysler300] More stuff needed
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] More stuff needed

If you have the broken off piece, you can drill a hole in both ends, use a finishing nail cut to length and gap filling super glue available at hobby stores. Don't think the concours judges noticed that fix. 

Sent from my iPad

On Oct 6, 2016, at 5:34 PM, 'Rich Barber' c300@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


Thanks, Gentlemen:


Gary’s catalog shows two different tips, both for ’60-’62.  I’ll take a look at Legendary’s offering, although it seems they may have been the ones claiming 1964 HT & Conv. visors were the same.  Not sure of which vendor—just something to watch out for.  I was able to buy a good used set of visors for our Konv in wrong color and sprayed them black. 


Rich Barber


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Don Cole mr300k@xxxxxxxxx [Chrysler300]
Sent: Thursday, October 06, 2016 3:22 PM
To: Noel Hastalis <cpaviper@xxxxxxxxxxx>
Cc: Rich Barber <c300@xxxxxxx>; pffkllc@xxxxxxx; chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] More stuff needed



Legendary has them. Just ordered replacement visors for my K and they offered them.

D. Cole

Sent from my iPhone

On Oct 6, 2016, at 5:33 PM, Noel Hastalis cpaviper@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


Got my plastic tips from Gary Goers a few years ago.


Sent from my iPhone

On Oct 6, 2016, at 4:20 PM, 'Rich Barber' c300@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:




Be sure to note that the hardtop and convertible visors and hardware are different.  A vendor tried to convince me otherwise, but they have different dimensions.  The hollow plastic tips get brittle and broken after 50 years + and I searched widely for an appropriate replacement from other stuff, like tubing.  Anyone found a suitable replacement for the little plastic tubes?


Rich Barber

Brentwood, CA


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of pffkllc@xxxxxxx [Chrysler300]
Sent: Thursday, October 06, 2016 10:08 AM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] More stuff needed



Hi Group:


    I am looking for the channel that holds the boot for Anne's K convert.  This piece attaches to the back of the rear seat.  I also need the visor hardware along with the plastic tips, for the K convert.  We scavenged the ones from our other convert and now have to replace them.




Pete Fitch


Posted by: Lindsey <lindsey@xxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap