Re: [Chrysler300] 300 G Front Seats
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300 G Front Seats





Put a bit of grease on the "peg" and that should hold them while you install the seat. They can't come off once they are properly fit in the seat track. Slide seat forward onto them then lower the back and bolt on.

Sent from my BlackBerry 10 smartphone on the Rogers network.
From: Val Jeffers edward1108@xxxxxxxxx [Chrysler300]
Sent: Thursday, October 20, 2016 11:35 AM
To: chrysler300@xxxxxxxxxxxxxxx
Reply To: Val Jeffers
Subject: [Chrysler300] 300 G Front Seats

 

Greetings all,
                        Just dropped Gary a note requesting the 4 front seat plastic rollers. However in the interim, is there a hardware store type replacement ? Mine are worn and wont stay on the pegs.

                                                                                                                  Thanks,

                                                                                                                  Val Jeffers




__._,_.___

Posted by: lindsey@xxxxxxxxxxxxxxx


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap