Re: [Chrysler300] Cast iron elbos for F-G rams
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Cast iron elbos for F-G rams

The elbows are the same left/right. I pulled up photos of mine when off my F. 

Sent from my iPhone

On Dec 7, 2016, at 2:40 PM, 'David Schwandt' finsruskw@xxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


Pretty sure they are the same left to right.

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Val Jeffers edward1108@xxxxxxxxx [Chrysler300]
Sent: Wednesday, December 07, 2016 1:37 PM
To: Sandy Beard; chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] Cast iron elbos for F-G rams

Just asking, wouldn't Jeff know ?

Sent from Yahoo Mail for iPhone <>

On Tuesday, December 6, 2016, 9:19 AM, Sandy Beard sbeard2@xxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Hi 300 ites,

Are there L and R cast exhaust elbows for F G rams or just one that fits both sides. Looking for them to get my rams on and Jeff C. is out of them. 2 on ebay but does not say L/R


Steve Beard

300 F

Delaware, Ohio

[Non-text portions of this message have been removed]


Posted by: Noel Hastalis <cpaviper@xxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap