|
We are talking the sheet metal backing cups not the gears, right? I have put the hupcaps together with epoxy on the plastic disc then sealing caulk , leaving the domes out. The plastic F and G inserts I had ? from Gary or club? Fit perfectly with tapered sides so the adhesive alone was more than enough. Never had any problems (despite no doubt purists wanting the cones) But if those cones corrode in, like they do, you wreck everything getting them out. ? 80% success rate? Often will not come out without cutting them , as top caves in or punctures, even with heat. Probably why needing them. Probably done like that at the whim of an engineer in 58, ..for ease of assembly --no real need for that with today’s adhesives? From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'Fern Rivard' crc@xxxxxxxxxxxx [Chrysler300] Yes Joe, they’re in his catalog but doesn’t have any stock. Fern Sent: Wednesday, January 11, 2017 3:54 PM Subject: Re: [Chrysler300] wanted domes re 300G or 300H hubcaps Hi Fern, I believe that Gary Goers has the domes and the centers in his catalog. Good luck, Joe On Monday, Janu ary 9, 2017 8:40 PM, "'Fern Rivard' crc@xxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote: Sorry but I made a mistake. What I really need is the domes that attach to the hubcaps which in turn have the red/wht/blue inserts. Does anyone have some of those reproduction domes that I could purchase? Would like to have two or three of those. Thanks from Fern __._,_.___ Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap