RE: [Chrysler300] 1964 300K convert
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 1964 300K convert

The armrest pads on our 300K convertible are black and 10.5” long.  From the ABC catalog:

1964-65 A / B / C-Body Arm Rest Pads 10.5"

The base is chromed plastic for a front door and has two cutouts/notches:  one for the door handle and the other to enable a firm finger grip.

64-65 A-B-C-Body Front ARP Base


Only sold in pairs.  The pads are screwed to the bases and the bases are screwed to the doors.


Rich Barber

Brentwood, CA



From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Steve Albu saforwardlook@xxxxxxxxx [Chrysler300]
Sent: Sunday, January 29, 2017 11:57 AM
To: Bob Merritt <bob@xxxxxxxxxxxxx>
Cc: Harry Torgeson <torg66@xxxxxxxxx>; Chrysler 300 List <Chrysler300@xxxxxxxxxxxxxxx>
Subject: Re: [Chrysler300] 1964 300K convert



ABC Moparts also has high quality reproduction dashpads and a whole lot more for some of the 1965 and later Chrysler 300s and other Mopars.  American made too.  Very much worth your consideration.  I have used many of his products.  Bob Baker, who runs the company, also owns a Chrysler 300 and many other Mopars.  



Steve Albu


On Sun, Jan 29, 2017 at 4:10 AM, 'Bob Merritt' bob@xxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:



If you are looking for the inside door pull - arm rest base piece,

new ones are available from ABC.






------ Original Message ------

From: "Harry Torgeson torg66@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>

To: "Chrysler 300 List" <Chrysler300@xxxxxxxxxxxxxxx>

Sent: 1/28/2017 4:58:50 PM

Subject: [Chrysler300] 1964 300K convert



Hi everyone thanks for all your help, I just started to drive the car this weekend, and I just broke the door passenger black plastic handle off while trying to the shut door that would not close, lots of surprises, I hope a club member  has a source for this part they can direct me too. I am retired, so this 300 is my hobby now.

Thanks Harry



Posted by: "Rich Barber" <c300@xxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap