Re: [Chrysler300] Distributor rebuild
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Distributor rebuild





My 300H dissy came back with new points set, dwell angle spot on, new cap, new points, new wiring,
About that same price as I recall.
Parts are very expensive, so it really is a bargain. 
Mike Moore
300H
On Mar 29, 2017, at 2:00 PM, Ray Melton rfmelton@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


Look up www.philbingroup.com   Phone number  503) 287-1718        They did a super job of restoring (not just rebuilding!) the distributor in my 1957 300C, installing a Pertronix electronic ignition unit and recurving the advance curve for better performance.  Total cost was ~ $160.   Excellent communication and service at a reasonable price.


Ray Melton

Las Cruces, NM


On 3/29/2017 2:34 PM, Sandy Beard sbeard2@xxxxxxxxxxxxxxx [Chrysler300] wrote:
 

Hi 300 ites,

Need a source for a distributor rebuild person. Philbin did one for me 5-6 years ago. Have not seen his ad in the mailings lately.

Anyone know if he is still around?

thanks,

Steve Beard

300F in Delaware ,Ohio






__._,_.___

Posted by: Michael Moore <mmoore8425@xxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap