RE: [Chrysler300] fiberglass access panels for F-G
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] fiberglass access panels for F-G





I would just use larger washers , ?black ? “fender washers’ will spread the loads –adding glass to it gets into how it ultimately looks….

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Sandy Beard sbeard2@xxxxxxxxxxxxxxx [Chrysler300]
Sent: Monday, April 10, 2017 9:34 AM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] fiberglass access panels for F-G

 




hello out there in 300 land.

 

Anyone ever use a fiberglass access panel for F/G's. G. Goers used to sell them. Question is, I have one but it looks sorta thin and worried if it will crack at the bolt holes under the frontend vibration. Thinking of beefing up the fiberglass with sheet fiberglass mat. Thanks in advance for your help.

Steve Beard

300F

Delaware, Ohio






__._,_.___

Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap