RE: [Chrysler300] 300K single carb
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 300K single carb


At this point in time, you will more than likely have to use whatever you can get your hands on. Have you tried NAPA??

I would think that Carb kits would mostly have all the same stuff in them anyway. The important parts like the accelerator pump.



From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Mick Kreszock kreszockcm@xxxxxxxxxxxx [Chrysler300]
Sent: Tuesday, June 06, 2017 5:05 PM
To: Listsaver 300 Club
Subject: [Chrysler300] 300K single carb


No I was not going to attempt the rebuild of the carburetor myself.  An age appropriate (older than me) factory tech will be doing it.  He said he was going to use a Walker kit but wanted me to check with the club members first to see if there was a different one that someone would recommend.  Or some other specific details that might be suggested.

[Non-text portions of this message have been removed]

Posted by: "David Schwandt" <finsruskw@xxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to

Yahoo Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo Groups is subject to:

Home Back to the Home of the Forward Look Network Archive Sitemap