RE: [Chrysler300] 57-59 300 radio speaker
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 57-59 300 radio speaker

The ohms are not as critical as often made out to be, 4 or 8 will work ok. The 4 will play slightly louder at max volume , the 8 will sound less distorted but slightly less max volume. The main thing is getting a high quality hi watt speaker that will not warp ; Japanese speakers very good, like Panasonic or Sony, Kenwood, from that auto radio place on line . Usually have to buy two…Boxed that way.


I usually buy the mid price one do not need the fancy stuff , tweeters etc on AM ; if a rear speaker, both F and B should be same ohms . If a single speaker now, it will have a jumper in a 4 pin socket or in the plug , varies, (for rear speaker) leave all that alone as it is


Hope that helps….sometimes have to mess with bolt holes.






From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of mjraguse@xxxxxxx [Chrysler300]
Sent: Wednesday, June 07, 2017 9:43 AM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 57-59 300 radio speaker


I need a correct ohm 5x7 radio speaker for my 58 D  front I/panel.  Any advice on this?
Thanks    Marv


Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap