RE: [Chrysler300] 300F Engine ID Pad
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 300F Engine ID Pad

We have an app for that:              


As noted there, by 1963 and 1964, the ram-inducted engines were stamped as shown below.

The example is of a1964 300K ram-inducted engine.





In reviewing that page, I noted the information below.  I believe the Chassis VIN/Vehicle ID Number for the 1956 300B’s should be corrected to “3N56, plus four digits”.





Vehicle ID Number

Engine ID



3N56100, plus four digits

3NE561001 and up



Additional reading may be found at:           


Rich Barber

Brentwood, CA—(Hoping to hear good news of personal and property safety from our members in the hurricane-impacted areas.)


From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Charlie V cv300g@xxxxxxxxx [Chrysler300]

Sent: Monday, September 11, 2017 1:39 PM

To: yahoogroups <chrysler300@xxxxxxxxxxxxxxx>

Subject: [Chrysler300] 300F Engine ID Pad



I know that the 300G's have a HP on the engine pad. . Do all 300F's also have an HP on the engine pad ?


Charlie Valentine


Posted by: Charlie V <mailto:cv300g@xxxxxxxxx>


Posted by: "Rich Barber" <c300@xxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap