Re: [Chrysler300] Re: G accelerator linkage
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Re: G accelerator linkage

Check your fuel pump push rod too. It may have worn down.

Sent from my android device.

-----Original Message-----
From: "Del Kerney del.kerney@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: list server <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Thu, 14 Sep 2017 3:04 PM
Subject: [Chrysler300] Re: G accelerator linkage


Removed lower bellcrank clamp from accelerator rod, took it to hardware store to find best fitting bolt. 8mm x 1 inch was best fit and worked out well installed.  Guess I need a new fuel pump now - no gas getting to carbs. Thanks to Dave Schwandt and Bob Merritt for their replies.

Del Kerney


Posted by: ripinator@xxxxxxxxxxx

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap